Cubedron / Cybedron
The Cubedron is a puzzle consisting of a transparent ball containing only 5 pieces.
The pieces are square pyramids that together form a cube. Each piece is one face of
the cube, and the top face of the cube is missing. By tilting the ball, any of
the side pieces can be shifted into the empty spot.
The Cubedron has faces where the edges have four different colours, and the pieces
are supposed to be placed so that where two pieces share an edge, their colours
should match. All pieces use the same four colours but in a different orders so that
the pieces are all unique. There are six possible unique tiles with four colours, and
the puzzle simply uses five of them. There are two solutions, but only one is reachable
without using dexterity.
The Cybedron is a variation of the Cubedron which has identical pieces with only two colours.
It has two solutions, both reachable without any dexterity skills.
The puzzle was designed and patented by Pantazis Houlis,
WO 2010/064994, published
10 June 2010.
If your browser supports JavaScript, then you can play the Cubedron or Cybedron by clicking
the link below:
The number of positions:
The cubedron has 5 pieces, each with 4 orientations. This leads to a maximum of 5!
permutations and 4^{5} orientations, and so to a maximum of
5! ·4^{5} = 122,880 positions. This limit is not reached because:
 The total twist of the faces is even (2)
 The orientation of the puzzle does not matter (4)
This leaves 5! ·4^{5}/8 = 15,360 positions. There is only
one reachable solution. The second solution can only be reached by doing a
single quarter twist of a piece, and so cannot be done except by some dextrous
manipulation of the puzzle.
The cybedron has 5 pieces which are all identical so only orientations
matter, leading to a maximum of 4^{5} = 1,024 positions. This time an apparent
single quarter turn is possible, although that involves invisibly swapping some pieces
around. The orientation of the puzzle as a whole does not matter, leading to 4^{5}/4
= 256 distinct positions. There are two solutions, both reachable.
A computer search gave the following results:
Cubedron
Moves  Positions 
0  1 
1  4 
2  12 
3  36 
4  108 
5  320 
6  898 
7  2118 
8  4030 
9  4894 
10  2350 
11  534 
12  50 
13  4 
14  1 
Total:  15360 

Avg Depth:  8.3794 


Cybedron, 1 solution
Moves  Positions 
0  1 
1  4 
2  12 
3  34 
4  76 
5  102 
6  27 
Total:  256 

Avg Depth:  4.3203 


Cybedron, 2 solutions
Moves  Positions 
0  2 
1  8 
2  24 
3  54 
4  91 
5  68 
6  9 
Total:  256 

Avg Depth:  3.8125 


This shows that on the Cubedron any position can be solved in at most 14 moves, and on
the Cybedron at most 6 moves whether you want a particular solved position or don't care
which of the two solutions is reached.
Notation:
Suppose you tilt the puzzle upwards so that the front tile goes over the top and falls down
to become the back face. That move will be denoted by the letter F. Similarly the letters L, B,
and R denote moves where the Left, Back, or Right tile moves over the top to the other side.
Solution:
Cubedron solutions 
Cybedron solutions 




The two solutions are shown above. On the Cubedron the second solution has all the pieces in the
same place as the first solution, but they are all rotated a quarter turn clockwise. The two solutions
on the Cybedron are identical except that the two colours have been exchanged.
Cubedron:
 Solve the bottom face. Simply tilt the puzzle so that the correct piece is on the bottom. You
can determine which tile belongs on the bottom face as follows:
1. Choose two colours, say yellow and green.
2. There are three ways the two colours could be arranged on a tile  yellow to the left of
green, yellow to the right of green, and yellow opposite green. Count how many there are
of these three types.
3. The tile that is unique in its placement of the two colours is the one that belongs on the
bottom face. On the standard arrangment above, there is only one tile that has yellow
opposite green so that should be the bottom tile.
 Solve the front tile. The are two tiles that can fit. The other two tiles will not work because
if you were to put one in front and rotate it so that its bottom edge matches the bottom face
then it will show the same colour on the left or right side as the bottom face has. This would
mean the left or right face has to edges of the same colour. Once you have decided which tile
to put at the front, solve it as follows:
1. Bring the tile to the front position, without caring about the orientation. This is easy to
do without disturbing the bottom face.
2. If the front tile is correctly oriented (i.e. its bottom edge colour matches with the bottom
face) then you are done.
3. Move the front tile upwards, the right tile to the front, and the first tile to the right.
This swaps the front and right tiles. In our notation this is F R B followed by rotating
the whole puzzle to the right so that the front tile ends up on the right.
4. Repeat step 3, to again swap the front and right tiles. The combined effect is that the
tiles haven't moved position, but that the front and right tiles have both been twisted
clockwise a quarter turn.
5. If the front tile is still not correctly oriented, repeat steps 3 and 4 until it is.
 Rotate the whole puzzle to the left, so that the solved tiles are on the left and bottom.
 Solve the front tile. This is done in exactly the same way as step b, but you must take care not
to disturb the left or bottom faces.
 Rotate the whole puzzle to the left, so that the solved tiles are on the left, back and bottom.
 Solve the front tile. This is again done in exactly the same way as step b, but you must take care not
to disturb the left, back or bottom faces.
 Rotate the whole puzzle to the left, so that the only unsolved face is at the front.
 If the front face needs a quarter turn in either direction then the solution you are aiming for is
not possible. Instead look at the four other faces and decide whether the other solution can be reached
by giving them a clockwise quarter turn, or by an anticlockwise quarter turn. Then, with the unsolved
piece in front again, do one of the following:
Clockwise: RBRB LF RBRB LF
Anticlockwise: LBLB RF LBLB RF
The front tile might now still need a half turn.
 To give the front tile a half turn, do RFR BBBB LFL.
Cybedron:
 Choose one of the two colours. For the rest of this solution I will assume you chose blue but if you
use red everywhere instead then you will get the other solved position.
 Hold the puzzle such that the blue edges of the bottom face are at the front and the right.
 Solve the front tile so that its blue edges are at the bottom and on the right. If it is not yet
correctly oriented, then do the following:
1. Move the front tile upwards, the right tile to the front, and the first tile to the right.
This swaps the front and right tiles. In our notation this is F R B followed by rotating
the whole puzzle to the right so that the front tile ends up on the right.
2. If the new front tile is also not correctly oriented, repeat step 1 until it is correct.
 Rotate the whole puzzle to the left, so that the solved tiles are on the left and bottom.
 Solve the front tile. This is done in exactly the same way as step b. This results in a blue bottom left corner.
 There are now two unsolved tiles. Alternate moving one and then the other until at least one of them is solved.
 If the last tile seemingly needs a quarter turn to be solved, then move that tile. It will now either be solved or need a half turn.
 If the last tile needs a half turn, then hold the puzzle with that tile in front. If the blue
corner of the cube lies at the back left then do LBLBLL, but if the blue corner is at the back
right do the mirror image of that, namely RBRBRR.
Nice move sequences:
 To swap solutions on the Cybedron, do FRF FRFRF FR.
 For a shorter way to swap solutions on the Cybedron, hold it with the monochrome corner
at the front bottom right, and do FLFLF.
 To rotate the four sides clockwise a quarter turn, do FRBLFR FRBLFR. This can be used on
the Cubedron to go from one solution to the other, provided you can also somehow twist the
bottom face. This can be done by tilting the puzzle slightly, and rotating it around the
main axis. The amount of play between the side tiles causes them to creep forward slightly,
so that after a while it is as if the bottom face has turned a quarter turn in the opposite
direction.